AMSOIL
Engine and Transmission Flush (FLSH) helps restore fuel
economy, increase operating efficiency and reduce
emissions in gasoline and diesel engines, and automatic
transmissions. Its potent, detergent-based formula
cleans sludge and deposit build-up, promoting lower
operating temperatures and reduced oil consumption.
AMSOIL Engine and Transmission Flush is safe on parts
and can be easily disposed of with waste oil.
Restores Vehicles to Like-New
New engines and transmissions run more efficiently, but
over time they gather harmful deposits that cause power
and performance loss. Stop-and-go driving, prolonged
idling, short trips that do not allow the engine to
reach full operating temperature, towing, the ingestion
of airborne dirt, fuel dilution, water condensation and
oxidized oil all can promote sludge build-up in motor
oil and transmission fluid. As it settles, sludge clogs
narrow oil passages, restricting oil flow to vital
parts, especially the upper valve train area.
In transmissions, deposits can form on
clutch plates, causing hesitation and erratic shifting.
Ultimately clutch glazing can set in, reducing the life
of the transmission. Deposits in engines and
transmissions can accelerate wear, causing power loss
and increased fuel consumption.
• Cleans engines and transmissions
for improved efficiency, fuel economy and lower
emissions
• Prolongs equipment life
• Detergent-based formula more environmentally
friendly
• Compatible with seals and gaskets
• One-treatment results
• Easily disposed of with waste oil
Installing new oil or transmission
fluid into a dirty vehicle may not be enough to remove
deposits and increase efficiency. The detergents and
dispersants in some lubricants may not be able to handle
leftover sludge and deposits, and the new lubricant soon
becomes unfit for service, accelerating the formation of
even more harmful deposits.
AMSOIL Engine and Transmission
Flush Benefits
Unlike many flush products, AMSOIL Engine and
Transmission Flush features a multi-use formulation that
dissolves and disperses sludge, varnish and deposits in
both engines and automatic transmissions. Due to its
detergent-based formulation, used AMSOIL FLSH can be
easily disposed of with waste oil, making it more
user-friendly. Its advanced formula of light base oil
technology, powerful detergents and dispersants provides
safe cleaning action. AMSOIL FLSH is compatible with
both petroleum and synthetic oils, preparing poorly
maintained equipment for installation of new oil. It
represents the first step toward restoring neglected
equipment to top-notch performance. AMSOIL Engine and
Transmission Flush provides the following benefits in
only one treatment:
Gasoline and Diesel Engines
• Helps loosen sticky valves and
rings, minimizing blow-by and reducing emissions
• Helps quiet lifter noise
• Promotes lower operating temperatures through
sludge removal
• Easy disposal
Automatic Transmissions
• Cleans deposits in oil cooler
and ports
• Helps unclog fluid passages
• Cleans deposits and varnish from clutch plates,
helping improve efficiency
• Promotes smoother operation and transmission life
through reduced shift delay
Applications
AMSOIL Engine and Transmission Flush is recommended for
diesel and gasoline engines, and automatic
transmissions. It is not recommended for CVT
transmissions or differentials.
Directions for Use
Though it works in one treatment, AMSOIL Engine and
Transmission Flush is safe enough to be used at every
oil change. If using a flushing machine, follow the
manufacturer’s recommendation. Otherwise, use the
following guidelines:
Engine:
Add 16 oz. bottle of AMSOIL Engine and Transmission
Flush to engine oil fill port. Idle the engine for 10-15
minutes, then immediately drain the oil. Ensure enough
time for the system to completely
drain. Remove and replace the engine oil filter. Refill
engine with new engine oil in the viscosity grade
recommended by the manufacturer.
Transmission:
Engage emergency brake. Add 16 oz. bottle of AMSOIL
Engine and Transmission Flush to transmission oil fill
port. Idle for 10-15 minutes; shift through drive and
reverse. Do NOT place vehicle under heavy load. Drain
entire transmission and torque converter of fluid.
FILTER MUST BE CHANGED prior to refilling with new
transmission fluid.
NOTE:
It is not recommended to flush transmissions that do not
have a removable pan or access to the transmission
filter.
|
(above) Automatic
transmission clutch plates pre-cleanup. Varnish
and glazing is heavy on some of the plates. |
|
(above) Automatic
transmission clutch plates after cleanup with
AMSOIL Engine and Transmission Flush reveal
lighter glazing and varnish. |
|
(above) Cylinder head
pre-cleanup. Note the sludge deposits on and
around the valve springs and push rod openings. |
|
(above) Cylinder head after
cleanup with AMSOIL Engine and Transmission
Flush. The valve springs and push rod openings
are noticeably cleaner, with fewer sludge
deposits. The manufacturer’s stamping is more
easily seen. |
|