AMSOIL OE Synthetic Diesel Oil
provides excellent protection and performance in
both on- and off-road diesel engines for the
original equipment manufacturer’s recommended
drain interval. It is a licensed API CJ-4/SN
motor oil suitable for both modern and older
diesel applications, including those equipped
with turbochargers. AMSOIL OE Synthetic Diesel
Oil exceeds the higher performance demands of
modern engines and withstands the stress of
heat, soot and acids to help prevent deposits,
wear and corrosion.
AMSOIL, the leader in automotive
synthetic lubrication, produced the world’s
first API-qualified synthetic motor oil in 1972.
Trust the extensive experience of AMSOIL, The
First in Synthetics®, to do the best job
protecting your engine.
Meets Emission System
Requirements
AMSOIL OE Synthetic Diesel Oil is a low-sulfated
ash formulation that meets the requirements for
low-emission quality diesel oil and protects
under the most severe conditions found in modern
diesel engines. It is compatible with all
exhaust treatment devices and is designed for
engines equipped with diesel particulate filters
(DPF).
Extreme-Temperature
Performance
OE Synthetic Diesel Oil is formulated for
improved heat and oxidation resistance over
conventional petroleum oil for cleaner engine
operation, maintaining power and fuel efficiency
for superior engine performance. Its dependable
cold-temperature flow assures easier start-up
and improved engine protection.
Resists Oil Consumption
and Emissions
Due to its low rate of volatility, AMSOIL OE
Synthetic Diesel Oil is able to reduce oil
consumption and emissions during operation. It
maintains its excellent film strength even
during high-temperature operating conditions to
ensure dependable protection, performance and
fuel efficiency.
Controls Soot-Thickening
and Wear
AMSOIL OE Synthetic Diesel Oil is formulated
with premium synthetic base stocks and robust
detergent/dispersant additives that keep soot
particles from agglomerating and forming larger
wear-causing particles. The OE Synthetic Diesel
Oil formulation allows for optimal protection,
maintaining performance by staying in the
respective viscosity grade.
APPLICATIONS
AMSOIL OE 10W-30 Synthetic Diesel Oil is
recommended for diesel engines and, where
appropriate, gasoline engines requiring any of
the following specifications:
• API licensed CJ-4, SN
• ACEA E9
• MAN 3575
• Renault RLD-3
• MTU Type 2.1
• Mack EO-O
• Volvo VDS-4, VDS-3
• Cummins CES 20081
• MB 228.31
• CAT ECF-3, ECF-2, ECF-1-a
COMPATIBILITY
AMSOIL OE Synthetic Diesel Oil is compatible
with conventional and synthetic motor oils.
Mixing AMSOIL motor oils with other oils,
however, will reduce the performance benefits.
Aftermarket oil additives are not
recommended for use with AMSOIL motor oils.
SERVICE LIFE
AMSOIL OE Synthetic Diesel Oil is recommended
for the intervals stated by the original
equipment manufacturer (OEM). Refer to the
owner’s manual for the specific oil change
interval. Replace the oil filter at each oil
change as specified by the OEM.
HEALTH & SAFETY
This product is not expected to cause health
concerns when used for the intended application and
according to the recommendations in the Material
Safety Data Sheet (MSDS). An MSDS is available upon request at 715-392-7101 or
on the
Corporate AMSOIL website MSDS page. Keep
Out of Reach of Children. Don’t pollute. Return used
oil to collection centers.
For warranty information, visit
the
Corporate AMSOIL website warranty page.
