PRODUCT
DESCRIPTION
AMSOIL X-Treme
Synthetic Food Grade Grease is an ultra-premium
aluminum complex grease designed for food
service and pharmaceutical industry equipment
where there is a possibility of incidental
contact.
Remains Stable
at Temperature Extremes
This product provides
exceptional performance over a wide temperature
operating range of -35°F to 350°F (up to 400°F
in intermittent use situations), making it
suitable for both hot and cold applications.
Extreme
Pressure Capabilities
AMSOIL X-Treme
Synthetic Food Grade Grease has excellent
extreme pressure capabilities that reduce
friction and heat generation and help eliminate
metal-to-metal contact in processing equipment.
Resists
Water Washout
AMSOIL X-Treme
Synthetic Food Grade Grease resists water
washout which ensures that the grease will stay
in place when exposed to water during washing
and rinsing. It also resists the harmful effects
of water, including rust and corrosion.
Provides
Versatility
Food industry
equipment such as preparation, processing and
packaging machinery requires special greases
that must be both efficient and non-toxic.
AMSOIL X-Treme Synthetic Food Grade Grease is
designed with non-toxic additives to help keep
food and pharmaceuticals safe.
Appearance
This product is an
attractive pure-white color to complement a
hygenic atmosphere which is important in food
processing and pharmaceutical facilities.
APPLICATIONS
AMSOIL X-Treme
Synthetic Food-Grade Grease is compatible with
Lithium complex, Calcium 12 hydroxy and other
Aluminum complex greases. It is not compatible
with Barium, Bentonite Clay, Calcium, Calcium
complex, Lithium, Lithium 12 hydroxy, Polyurea
or Sodium greases. If switching from an
incompatible grease-type to AMSOIL X-Treme
Synthetic Food-Grade Grease, complete purging is
required.
TYPICAL TECHNICAL PROPERTIES
|
AMSOIL X-Treme Synthetic Food Grade
Grease
|
Thickener
|
Synthetic Aluminum Complex
|
National
Lubricating Grease Institute (NLGI)
Consistency Grade
|
2
|
Operating
Temperature Range, °C, (°F)
|
-37
(-35)
to 204 (400) |
Penetration (ASTM
D-217) Unworked 25°C (77°F)
|
265-295 |
Dropping Point,
°C, (°F) (ASTM D-556)
|
273
(525) |
Four Ball Wear
Scar Diameter (ASTM D-2246)
40kgf 1200 rpm, scar diameter in
mm
|
0.50 |
Four Ball EP Test
(ASTM D-2596) weld load kgf
|
315
|
Four Ball EP Test
(ASTM D-2596) Load Wear Index
kgf
|
44
|
Low Temperature
Torque (ASTM D-4693) At -40°C,
Nm
|
2.7
|
Water Washout
(ASTM D-1264) 80°C, % loss
|
5.4
|
Timken OK Load
(ASTM D-2509) lbs.
|
0.40 |
High Temperature
Life in Hours (ASTM D-3527)
|
48 |
Rust Prevention
(ASTM D-1743)
|
pass |
|