AMSOIL Corporate Website AMSOIL Online Store Ordering Info Free Catalog Dealerships Preferred Customer Program Retail Accounts

Commercial Accounts

Motor Oils
Transmission Fluids
Gear Lubes
Fuel Additives
Appearance Care
Specialty Products
Test Results
Tech Info
Save Money
Contact Us



AMSOIL Series 2000 Synthetic Racing Grease, NLGI #2, GC/LB (GRG)

AMSOIL Series 2000 Synthetic Racing Grease helps protect wheel bearings and chassis components from the dangerous, damaging effects of hot pavement, huge engines and the unceasing friction of intense speed. It is ideal for all high-temperature/high-speed applications.


Package sizes include:

14-oz. Cartridge
14-oz. Cartridges (case of 10)
14-oz. Cartridges (case of 40)
35-lb. Lug
120-lb. Keg

Anti-Wear Performance
Series 2000 Racing Grease is engineered with extreme-pressure additives to deliver excellent wear protection in heavily loaded, high-speed racing applications. Its high-performance anti-wear additive package helps ensure long component life.

Friction Reduction
Because it effectively reduces friction, Series 2000 Racing Grease not only inhibits wear, it also maximizes power through-put and fuel efficiency. Its superior friction-reduction properties help ensure race vehicles operate at peak performance.

Load Capacity
Although Series 2000 Racing Grease is specially formulated for high-temperature/high-speed applications, it also provides superior protection for low-speed bearings. Components receive the load-bearing capacity of a heavy-duty grease without sacrificing the high-temperature protection of a multi-purpose grease.

All-Temperature Protection
Series 2000 Racing Grease pairs a high-viscosity-index synthetic base oil with a top-quality lithium complex thickener known for its extraordinary performance in temperature extremes. It offers excellent low-temperature pumpability and high-temperature consistency for dependable protection in all temperatures.

Resists Oxidation, Corrosion & Washout
Series 2000 Racing Grease contains a robust package of oxidation inhibitors, helping prevent grease breakdown and component surface damage. Its excellent adhesion and cohesion properties allow it to resist water washout during operation in wet conditions. A premium blend of corrosion inhibitors further protects against rust and corrosion formation.

Typical Technical Properties
AMSOIL Synthetic Lithium Complex Racing Grease
Series 2000 Racing Grease NLGI
Thickener Lithium Complex NR*
NLGI Consistency Grade 2 EP NR*
NLGI Performance Grade GC-LB NR*
Penetration (ASTM D-217) 25 C [77 F], 0.1 mm Worked 60 strokes 265-295 220 - 340
Dropping Point (ASTM D-566) C [77 F] 288 (550) 220 (428)
Water Washout (ASTM D-1264) 79 C [175 F] % loss 5.0 15 max
Oil Separation (ASTM D-1742) 24 hr. @ 25 C [77 F], % loss 2.8 10 max
Rust Protection (ASTM D-1743) pass pass
Timken OK Load Test (ASTM D-2509), lbs. 60 NR*
Fortified with Moly Compound No NR*
Four Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm 0.52 0.9 max
Compatibility with other greases Excellent NR*
Extreme Pressure, Four Ball Method (ASTM D-2596) Weld Point, kgf 400 200 min
Extreme Pressure, Four Ball Method (ASTM D-2596) Load Wear Index, kgf 41 30 min
High Temperature Life (ASTM D-3527) hours 100 80 min
Fretting Wear (ASTM D-4170)* mg 8.5 10 max
Elastomer Compatibility (ASTM D-4289) Volume Change, %, GC 21.6 -5 to +30
Elastomer Compatibility (ASTM D-4289) Volume Change, %, LB 9.8 0 to +30
Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, GC -4 +2 to -15
Elastomer Compatibility (ASTM D-4289) Hardness Change, durometer-A points, LB -6 0 to -10
Leakage (ASTM D-4290), G* 5.0 10 max
Low Temperature Torque (ASTM D-4693) nm, max @ -40 C [-40 F] 7.2 15.5
Water Spray Off (ASTM D-4049), % max 18 NR*
* NR: Not Required for NLGI GC or LB labeling